Sump Pumps

Zoeller Sump Pumps

We here at KB Complete Plumbing, Heating and Cooling, Inc. are proud to have Zoeller as one of our premier pump suppliers. The Mighty-Mate 53 (featured above) is one of the pumps we find most in demand and with features like those listed below its no wonder.

Features & Benefits

Submersible pump for dewatering (sump) or effluent (septic tank systems).

• Float operated, submersible (NEMA 6) 2 pole mechanical switch & variable level long cycle systems available
• Corrosion resistant powder coated epoxy finish
• No sheet metal parts to rust or corrode
• Stainless steel screws, switch arm, guard and handle
• No screens to clog
• Watertight neoprene square ring between motor and pump housing
• Solid buoyant polypropylene float
• Oil-filled, hermetically sealed, automatic reset thermal overload protected motor
• Upper and lower sleeve bearings running in bath of oil
• Entire unit pressure tested after assembly
• Carbon and ceramic shaft seal
• Maximum temperature for effluent or dewatering 130°F (54°C)
• Passes ½ spherical solids
• 1 ½ NPT discharge
• On point: 7 1/4"
• Off point: 3"
• Major width: 10 3/32"
• Major height: 10 1/16"
• Watertight and dust tight
• Permanently oiled bearings

Special Model Features
Model 53:

• Cast iron switch case, motor and pump housing
• Engineered thermoplastic base
• Engineered, glass filled, plastic impeller with metal insert
• Stainless steel guard and handle
• Lower and upper bearings, oil fed cast iron
• 53-0001 weight: 23 lbs

There are many other features depending on the model number and we have all of them available to our customers.

So whatever your plumbing needs don´t forget to call, KB Complete Plumbing, Heating and Cooling, Inc., your Zoeller Pump Source.

Let us bring you the quality service and a professional installation that you deserve. Feel free to call us now for the best plumbing service the Kansas City area has to offer. Call us today, we'll be there today! 913-722-6835 or 816-524-1722

Stevens Sump Pumps

We here at KB Complete Plumbing, Heating and Cooling, Inc. are proud to have Stevens Pump Company as one of our premier pump suppliers for larger applications. The Stevens Model S5710 sump pump (featured above) is the leader of the pack when we need a ½ hp or larger pump, sometimes for a special application and sometimes just because the customer recognizes the level of quality that is built in.

S5710

Submersible Sump Pump with a Stainless Steel Motor Housing

• Warranty 7 years
• Motor HP .6
• Discharge 1½"
• Water Start 12"
• Water Stop 3½"
• Current Start 25 amps
• Current Running 8.6 amps
• Max Head 21½ ´
• Capacity 60 GPM @ 10´
• Weight 19 lbs
• Height 11"

Stainless Steel motor housing for best corrosion resistance. 1/2 HP, oil-filled, split phase sealed motor with lifetime lubrication. Diverter flange insures solid water will surround the impeller eliminating poor pumping efficiency due to cavitation. Long life dependable, quiet sleeve bearing for quieter operation. Automatic reset overload protector for positive protection against motor burnout. Water level control is completely enclosed and isolated from water contact. Corrosion resistant electrical connectors and stainless steel fasteners used for assembly, assures years of dependable service. Corrosion inhibitors to protect switch and electrical connections. Each pump is pressure tested and put through its complete running cycle before shipment. All cast iron parts use fusible powder coating. NO V.O.C.s released into the atmosphere. Superior corrosion resistance.

We at KB Complete Plumbing, Heating and Cooling, Inc. have this product and many others from Stevens Pump Company available to our customers, so don´t forget to call 913-722-6835 or 816-524-1722 to schedule service today.

Let us bring you the quality service and a professional installation that you deserve. Feel free to call us now for the best plumbing service the Kansas City area has to offer.

PHCC Pro Series 2400 Battery Backup Sump Pump System

Features

Automatically switches to battery power when AC fails

Recharges automatically

Monitors system conditions and alarms when:

• Battery needs water, is discharged or needs to be replaced
• Battery cable is loose or corroded
• Power plug is disconnected, fuse is blown or circuit breaker is tripped
• Pump is clogged or broken
• Backup pump has been activated

Alarm can be silenced during a power outage

Displays percentage of power remaining in the battery

Runs pump weekly to test for proper operation

Can run directly on AC power

Output terminals for connection to a security system or auto-dialer - Let the system call you

Accommodates up to two (2) B2200 batteries for 16 hours of continuous pumping

Specifications

Pump

• Flow/Amp. Draw @ 0 ft Head
• Flow/Amp. Draw @ 10 ft Head
• Max Head
• Inlet
• Motor Type
• Voltage

• 4,000 GPH / 10.5 Amps DC
• 2,400 GPH / 9.0 Amps DC
• 17 ft (5.2 M)
• Snap-on Non-corrosive ABS Screen
• Brush-type
• DC12 VDC

Charger/Monitor

• Power Input
• Output Voltage/Current
• Pumping Time with B-2200 Battery
• Pumping Time with B-1290 Battery
• Pumping Time - Intermittent Duty
• Float Switch
• Shipping Weight

• 115 VAC, 60Hz
• 12 VDC 13.0 Amps
• 8 Continuous Hours
• 6.5 Continuous Hours
• Days of pumping
• Dual micro reed switch with protective cage
• 22.0lb. (9.9Kg)

Dimensions

Pump

• Width
• Depth
• Height

• 9.0" (22.86 cm)
• 4.5" (11.45 cm)
• 8.5" (21.59 cm)

---

PHCC Pro-Series 1000 Battery Backup Sump Pump System

Features

Dependable 1000 GPH, continuous-duty, submersible pump

Pumps 1000 GPH at a 10-foot lift

Stainless steel shaft, rulon seal, and rustproof housing provide long-lasting, reliable operation

Trickle charger maintains the battery at full charge System continuously monitors the battery and power conditions to ensure dependable operation and sounds an alarm when:

• The AC power is out or the circuit breaker has blown
• The battery fluid is low and water needs to be added
• The pump was activated
• The battery is discharged, defective or the terminals need cleaning

Alarm can be silenced

Specifications

Pump

• Flow/Amp. Draw @ 0 ft Head
• Flow/Amp. Draw @ 10 ft Head
• Max Head
• Inlet
• Motor Type
• Voltage

• 2,000 GPH / 6.5 Amps DC
• 1,000 GPH / 3.25 Amps DC
• 15 ft (4.6 M)
• Snap-on Non-corrosive ABS Screen
• Brush-type
• DC12 VDC

Charger/Monitor

• Power Input
• Output Voltage/Current
• Pumping Time with B-1000 Battery
• Pumping Time with B-2200 Battery
• Pumping Time with B12-90 Battery
• Pumping Time - Intermittent Duty
• Float Switch
• Shipping Weight

• 120 VAC, 60Hz
• 12 VDC .4 Amps
• 6 Continuous Hours
• 12 Continuous Hours
• 10 Continuous Hours
• Days of pumping
• Dual micro reed switch with protective cage
• 9.0lb. (4.1Kg)

We at KB Complete Plumbing, Heating and Cooling, Inc. have this product and many others from Pro Series Pumps available to our customers, so don´t forget to call us at 913-722-6835 or 816-524-1722 to schedule service today.

Let us bring you the quality service and a professional installation that you deserve. Feel free to call us now for the best plumbing service the Kansas City area has to offer.